Sunday, 28 October 2018

VERTEBRAL COLUMNS

                                  
VERTEBRAL COLUMNS

The normal anatomy of the spine is usually described by dividing up the spine into three major sections: the cervical, the thoracic, and the lumbar spine. Each section is made up of individual bones, called vertebrae.

 7 cervical vertebrae
12 thoracic vertebrae
 5 lumbar vertebrae.

The spine is made of a column of bones. A round bone called a vertebral body . A bony ring attaches to the back of the vertebral body, forming a canal for the spinal cord and nerves. This bony ring is formed by two sets of bones. One set called the pedicle bone attaches to the back of each vertebral body to the side, transverse processes. Processes are outgrowths of bone and then subsequently named for where the outgrowth occurs. A lamina (Latin for plate) bone connects to the other end of the pedicle, one on the left and one on the right to connect the transverse process with the spinous process.
The spinous process is your 'back bone'. Each vertebral segment creates a bony circle, called the spinal canal or vertebral foramen, that protects the spinal cord and spinal nerves.
The lamina bones form a protective roof over the back of the spinal cord. When the vertebra bones are stacked on top of each other, the canal forms a long tube that surrounds and protects the spinal cord as it passes through the spine.

There are four facet joints associated with each vertebra.
A pair that face  upward and another pair that face downward.
These interlock with the adjacent vertebrae and provide stability to the spine.
The vertebrae are separated by intervertebral discs, which act as cushions between the bones.
Each disc is made up of two parts. The hard, tough outer layer, called the annulus,
surrounds a mushy, moist center, called the nucleus. When a disc herniates or ruptures,

the soft nucleus spurts out through a tear in the annulus and can compress a nerve root. 

The nucleus can squirt out on either side of the disc, or in some cases, both sides.

The amount of pain associated with a disc rupture often depends upon the amount of 

nucleus that breaks through the annulus and whether it compresses a nerve.

cervical vertebra


There are seven cervical vertebrae, named C1-C7, designed for flexibility and movement,The first two cervical vertebrae are very specialized to allow us to turn our head from side to side. The first cervical vertebra (C1) is called the atlas . The second cervical vertebra (C2) is called the axis as it is the line upon which the head and C1 rotate upon. The C1 vertebra connects the skull to the cervical spine. These two vertebrae have different anatomy than the rest of the spine. The C1 vertebra is formed like a ring that sits on top of C2. The C2 vertebra has a bony knob that fits into the front portion of the ring of the C1 vertebra. This bony knob is called the odontoid process . It is held in place by a special ligament that holds it tightly to the front of the ring of the C1 vertebra. While the cervical 

spine is very flexible, it is also at greatest risk for injury from strong sudden movements, as there is less muscular support

THORACIC VERTEBRA 


There are twelve thoracic vertebrae, named T1-T12, specialized for stability. The thoracic 

spine aids in keeping the body upright, protects vital chest organs and articulates with each rib to form the rib cage. Each rib is firmly connected to each level of the thoracic spine. The thoracic spine has a kyphotic shape, a “C” shape, and the discs in this part of the spine are relatively thin.



LUMBAR VERTEBRA 

There are usually five lumbar vertebrae, named L1-L5, designed for weight bearing loads 
and movement. In some people, they may have developed four or six lumbar vertebrae. In 
some cases one of the bones of the sacrum, the base of the spine, forms as a vertebra 
instead of the sacrum. This is called a transitional (or sixth) vertebra and is simply a bony 
anomaly.
The lumbar spine is shaped like the cervical spine; it is lordotic like a backwards “C”. The two lordotic curves in the neck and low back are balanced by the thoracic kyphotic “C” curve so the spine’s center of gravity is overall balanced in an “S” shape. The vertebrae in the lumbar spine are the largest of the entire spine, designed to hold increasing forces of weight. The lumbar spinal canal is also the largest, allowing for more space for the nerves.
SACRUM



Back pain or leg pain (sciatica) can typically arise due to injury where the lumbar spine and sacral region connect (at L5-S1) because this section of the spine is subjected to a large amount of stress and twisting during certain activities, such as sports and sitting for long periods of time.
  •  The first three vertebrae in the sacral region have transverse processes that come together to form wide lateral wings called alae. These alae articulate with the blades of the pelvis (ilium).
  • As part of the pelvic girdle, the sacrum forms the back wall of the pelvis and also forms joints at the hip bone called the sacroiliac joints.
  • The sacrum contains a series of four openings on each side through which the sacral nerves and blood vessels run.
  • The sacral canal runs down the center of the sacrum and represents the end of the vertebral canal.
COCCYX

The coccyx is a triangular arrangement of bone that makes up the very bottom portion of the

 spine below the sacrum. It represents a vestigial tail, hence the common term tailbone. The 

coccyx may consist of three to five different bones connected by fused—or semi-fused

joints and/or disc-like ligaments. The coccyx connects with the sacrum through the 

sacrococcygeal joint, and there is normally limited movement between the coccyx and the 

sacrum. The coccyx usually moves slightly forward or backward as the pelvis, hips, and 

legs move. When a person sits or stands, the bones that make up the pelvis (including the 

coccyx) rotate outward and inward slightly to better support and balance the body.

Thursday, 25 October 2018

SHOULDER

                                     

The shoulder joint is formed where the humerus (upper arm bone) fits into the scapula (shoulderblade), like a ball and socket. Other important bones in the shoulder include: The acromion is a bony projection off the scapula. The clavicle (collarbone) meets the acromion in the acromioclavicular joint.


The rotator cuff connects the humerus to the scapula and is made up of the tendons of four muscles, the supraspinatus, infraspinatus, teres minor and the subscapularis.  Tendons attach muscle to bone.  Muscles in turn move bones by pulling on the tendons.  The muscles of the rotator cuff keep the humerus tightly in the socket. The socket, or the glenoid, is shallow and flat.  It is rimmed with soft tissue called the labrum that makes a deeper socket that molds to fit the humeral head.  The joint capsule surrounds the shoulder joint.  It is a fluid filled sac that lubricates the joint.  It is made up of ligaments.  Ligaments are soft tissue that holds bone to bone.  Shoulder injuries can occur to any part of the shoulder.
The shoulder has a wider and more varied range of motion than any other joint in the body. Our shoulder allows us to do everything from paint to play basketball, but this flexibility also makes the shoulder one of the most unstable joints in the body
Those most at risk for shoulder problems are athletes or workers with “overhead” movements—swimmers, throwers, painters and construction workers
Below are some anatomic terms surgeons use as these terms apply to the shoulder:
Anterior — the abdominal side of the shoulder
Posterior — the back side of the shoulder
Medial — the side of the shoulder closest to the spine
Lateral — the side of the shoulder farthest from the spine
Abduction — move away from the body (raising the arm)
Adduction — move toward the body (lowering the arm)
Proximal — located nearest to the point of attachment or reference, or center of the body
Distal — located farthest from the point of attachment or reference, or center of the body
Inferior — located beneath, under or below; under-surface


There are three joints in the shoulder girdle:
the glenohumeral joint (GH) is a ball-and-socket joint where the humerus meets the glenoid on the scapula; this joint is informally known as the shoulder joint.
the acromioclavicular joint (AC) is a gliding joint where the acromial process on the scapula links to the collar bone (clavicle)
the sternoclavicular joint (SC) is a double gliding joint between the sternum (breastbone) and the clavicle (collar bone)

The Rotator Cuff
The rotator cuff consists of four muscle-tendon units that originate on the scapula and attach to the tuberosities of the humerus. The role of the rotator cuff is to keep the head of the humerus centered in the glenoid fossa throughout the shoulder’s range of motion and when raising the arm. The rotator cuff is the primary stabilizer during movement of the GH joint. Both overuse and traumatic injuries to the rotator cuff are the most common problems in the shoulder girdle.

Problems of the Shoulder

Acromioclavicular degeneration
Acromioclavicular joint separation
Adhesive capsulitis (Frozen Shoulder)
Arthritis—rheumatoid, traumatic
Baseball shoulder
Calcific Tendonitis
Cervicobrachial syndrome
Fractures
Labral tear
Growths or Tumors, benign or malignant (Neoplasm)
Muscle spasm
Necrosis (cell or tissue death)
Painful Arc Syndrome
Rotator cuff injury or disease
Shoulder instability
Supraspinatus syndrome
Sprengel’s deformity

Wednesday, 24 October 2018

WRIST

                                                

The wrist is a surprisingly complicated joint, with multiple bones and soft tissues tendons, ligaments, and muscles to enable the hands to be both flexible and strong. Some experts speculate that it’s the most complex joint in the body.The bones comprising the wrist include the distal ends of the radius and ulna, 8 carpal bones, and the proximal portions of the 5 metacarpal bones


At the wrist end of the radius and ulna are two rows of small round bones four in each row known as the carpal bones:
· The row closest to the forearm are the proximal carpals
· The row closer to the fingers are the distal carpals.


· scaphoid.
· lunate.
· triquetral.
· pisiform.
· trapezium.
· trapezoid.
· capitate.
· hamate. hamulus.

ELBOW


                                        

      The elbow is a hinged joint made up of three bones, the humerus, ulna, and radius.  The ends of the bones are covered with cartilage.  Cartilage has a rubbery consistency that allows the joints to slide easily against one another and absorb shock.  The bones are held together with ligaments that form the joint capsule.  The joint capsule is a fluid filled sac that surrounds and lubricates the joint



· Humeroulnar joint – Hinge joint formed between the humerus and the ulna. Allows flexion and extension of the elbow
· Humeroradial joint– Between the radius and humerus. Participates in flexion and extension but more importantly in supination and pronation of the forearm.
· Proximal radioulnar joint – A pivot joint formed by the radius and ulna. It participates in supination and pronation as well.


HUMERUS

                                       

The humerus is the long bone in the upper arm. It is located

between the elbow joint and the shoulder. At the elbow, it

connects primarily to the ulna, as the forearm's radial bone

connects to the wrist. At the shoulder, the humerus connects

to the frame of the body via the glenoid fossa of the scapula


The humeral upper extremity consists of a rounded head, a

narrow neck, and two short processes (tubercles, sometimes

called tuberosities). The body is cylindrical in its upper portion,

 and more prismatic below. The lower extremity consists of


2 epicondyles, 2 processes (trochlea & capitulum), and 3

PULMONARY ARTERY

                                          pulmonary artery The pulmonary artery conveys the venous blood from the right ventricle of the ...